Instructions;
1. ATOMIC PRO™ Borophene 10h should be applied on a decontaminated, clean, fully corrected and prepped surface.
2. Follow recommended precautions.
3. Shake bottle well before use.
4. Apply 10-15 drops of Borophene onto an applicator pad.
5. Spread in a crosshatch motion to cover immediate area.
6. Borophene will start to flash in 30 seconds to 1 minute.
7. Apply to test area with a clean new microfiber applicator, level Borophene.
8. Using a new clean microfiber towel buff to a shine.
9. Apply 5-7 more drops and proceed to the next area making sure to overlap the first application area.
10. Use additional new clean microfiber towels as needed to buff all areas.

IMPORTANT:
11. After all surfaces are coated, inspect with lighting and buff off any high spots within the first hour.

Note:
12. If the product has soft cured and high-spots still remain, use ATOMIC PRO™ LEVELADE to assist in the post inspection leveling process.
13. Product will reach soft cure in 3-12 hours and fully cure in 72 hours.

Precautions:
Respirator, gloves eye protection, and protective clothing are recommended.
NO SMOKING within 50 feet while applying this product. Keep away from excessive heat and freezing temperatures. Keep containers sealed when not in use.
Use preventative steps to guard against static discharge.

IF THERE IS A FIRE: Extinguish it by using either a fire extinguishing powder, alcohol-resistant foam, or carbon dioxide.
Properly dispose of the container.
Store coating in an area that is well ventilated and cool.