ATOMIC PRO™ (PLC)-POLISH-LIGHT FINISH COMPOUND 2500 Grit

$34.99 USD

ATOMIC PRO™ POLISH LIGHT-FINISH COMPOUND (PLC) 2500 Grit-provides an extensive range of meticulously tested and approved cleaning, polishing, and protective coatings and detailing solutions to meet all your maintenance requirements.

PLC features diminishing micro-abrasive technology that offers a user-friendly application to deliver impressive results. Whether you require heavy cutting, polishing, or finishing, ATOMIC PRO™ has the ideal compound for your specific needs. These compounds are water based, low dusting, silicone-free, and body shop safe with no fillers added. ATOMIC PRO™ Compounds are ideal for DA, rotary, orbital or hand use and can be used with foam, wool or microfiber pads.

PLC is a medium compound designed to achieve a smooth and deep finish. With a rating of 2500, PLC effectively removes light swirls, scratches, and other challenging imperfections. PLC can be used as your finishing step or you can opt for an even more refined finish with ATOMIC PRO™ ULTRA FINISH (UFC) 3800.

  • 2500 grit 
  • Diminishing micro-abrasive compound
  • Eliminates light-oxidation, water spots,  light scratches and light swirl marks for finishing. 
  • No fillers
  • Water-based 
  • Low dusting
  • Silicone- free
  • For use with DA, rotary, orbital and by hand 
  • Use with foam, wool or microfiber pads 
  • Works on single-stage paint, clear-coats, vinyl wrap, gelcoats, headlights and more
Size

Estimated delivery between November 08 and November 10.

ATOMIC PRO™ POLISH- LIGHT FINISH 2500 (PLC) COMPOUND is designed to remove light scratches and swirls on single stage paint, clear-coats, gelcoats, ceramic coatings, vinyl wrap, plastics, headlights, and more.

Instructions
Precaution: always use proper pad, selection, protect edges, and test in an inconspicuous area.

Directions for use by hand:
1. Shake well.
2. Apply a small amount of ATOMIC PRO™ POLISH-LIGHT FINISH 2500 (PLC) Compound to your primed applicator.
3. Working in small sections, buff right to left and up-and-down until the desired finish is achieved.
4. Wipe away with ATOMIC PRO™ PURPLE QUICK DETAILER dampened plush microfiber towel.
5. Hand buff with a plush microfiber towel to achieve a brilliant shine.

Directions for use by machine:
1. Shake well.
2. Apply small amount of PLC to your primed polishing or finishing pad.
3. Working in small sections, polish at 1300-1900 rpm (5100-6100 OPM on DA) in both right to left and up-and-down motions until all defects are removed.
4. Reduce pressure until the desire gloss is achieved.
5. Never allow the pad to dry out.
6. Do Not over heat the surface area. (Use ATOMIC PRO™ PURPLE QUICK DETAILER to dampen surface).
7. Wipe away with, PQD, dampen plush, microfiber towel.
8. Hand buff with a plush microfiber towel to achieve a brilliant shine.

WARNING
Hazard Statement: Harmful if swallowed, or inhaled.
Precautionary statement: Wear respirator and personal protective gear.
Avoid breathing dust/fume/vapors.
Use in well ventilated areas.

IN CASE OF EYE CONTACT:
Rinse with water for 15 minutes.

IF INHALED:
Move to fresh air and keep comfortable. If irritation persist, call a doctor.

IF SWALLOWED:
Call a doctor or the poison control center at
1-800-222-1222

California Prop 65 Warning:
No chemicals in this product have been found to cause cancer or reproductive harm.

KEEP OUT OF REACH OF CHILDREN
EMERGENCY-CALL INFOTRAC
1-800-535-5035





Share

ATOMIC PRO Compound 2500 diminishing compound removes swirls and light imperfections while finishing to a high gloss

ATOMIC PRO™ (PLC)-POLISH-LIGHT FINISH COMPOUND 2500 Grit

$34.99 USD

$34.99 USD