ATOMIC PRO™ (UFC)-ULTRA FINE COMPOUND 3800 Grit

$34.99 USD

ATOMIC PRO™ ULTRA FINE COMPOUND (UFC) 3800 Grit-provides an extensive range of meticulously tested and approved cleaning, polishing, and protective coatings for detailing solutions to meet all your maintenance requirements.

ATOMIC PRO™ compounds feature diminishing micro-abrasive technology that offers a user-friendly application to deliver impressive results. Whether you require heavy cutting, polishing, or finishing, ATOMIC PRO™ has the ideal compound for your specific needs. These compounds are water based, low dusting, silicone-free, and body shop safe with no fillers added. ATOMIC PRO compounds are ideal for DA, rotary, orbital or hand use and can be used with foam, wool or microfiber pads.

UFC-ATOMIC PRO™ ULTRA FINISH 3800 is a final finishing compound, that achieves a dazzling reflective finish. With a rating of 3800, ULTRA FINISH 3800 effectively eliminates ultra-fine scratches, halos, and other imperfections that are hard to discern.

  • 3800 grit 
  • Diminishing micro-abrasive compound
  • Eliminates ultra-fine scratches, halos, and other imperfections for fine finishing. 
  • No fillers
  • Water-based 
  • Low dusting
  • Silicone- free
  • For use with DA, rotary, orbital and by hand 
  • Use with foam, wool or microfiber pads 
  • Works on single-stage paint, clear-coats, vinyl wrap, gelcoats, headlights and more 
Size

Estimated delivery between February 04 and February 06.

ATOMIC PRO™ ULTRA-FINISH 3800 COMPOUND (UFC) is designed to remove very light scratches on single stage paint, clear-coats, gelcoats, ceramic coatings, vinyl wrap, plastics, headlights and more.

Precaution: always use proper pad, selection, protect edges, and test in an inconspicuous area.

Directions for hand application:
1. Shake well.
2. Apply a small amount of ATOMIC PRO™ ULTRA-FINISH Compound 3800 (UFC) to your primed applicator.
3. Working in small sections, buff right to left and up-and-down until the desired finish is achieved.
4. Do not dry-out pad.
5. Wipe away with a ATOMIC PRO™ PURPLE QUICK DETAILER dampened, plush, microfiber towel.
6. Buff to achieve a brilliant shine.

Directions for machine use:
1. Working in small sections, apply small amount of ATOMIC PRO™ ULTRA-FINISH 3800 Compound (UFC) to your primed finishing pad.
2. Working a small sections polish at 1300-1900 rpm (5100-6100 OPM on DA) in both right to left and up-and-down motions until all defects are removed.
3. Reduce pressure until the desire glosses achieved.
4. Never allow the pad to dry out.
5. Do not over heat surface.
6. Wipe away with a ATOMIC PRO™ PURPLE QUICK DETAILER dampened, plush, microfiber towel.
7. Hand buff to achieve a brilliant shine.

WARNING
Hazard statement: Harmful if swallowed, or inhaled.
Precautionary statement: Wear respirator and personal protective gear. Avoid breathing dust/fume/vapors.
Use in well ventilated areas.

IN CAE OF EYE CONTACT: Rinse with water for 15 minutes.
IF INHALED: Move to fresh air and keep comfortable.
IF IRRITATION PERSISTS: Call a doctor.
IF SWALLOWED: Call doctor or Poison Control Center at 1-800-222-1222.

California Prop 65 Warning:
No chemicals in this product have been found to cause cancer or reproductive harm.

KEEP OUT OF REACH OF CHILDREN
EMERGENCY-CALL INFOTRAC
1-800-535-5053

Share

ATOMIC PRO Ultra fine compound 3800 finisher for a high gloss finish after polishing

ATOMIC PRO™ (UFC)-ULTRA FINE COMPOUND 3800 Grit

$34.99 USD

$34.99 USD