ATOMIC PRO™ LINQ 9h BOROPHENE CERAMIC COATING

Elevate your vehicle protection with ATOMIC PRO™ LINQ 9h and enjoy the peace of mind that comes with long lasting semi-professional grade ceramic coating.

Instructions
1. Before you begin, make sure the vehicles surface is clean, dry, and free from contaminants.
2. In a shaded area, away from direct sunlight, use a microfiber applicator, and apply up to 15 drops of ATOMIC PRO™ LINQ 9h at a time.
3. Spread evenly in a cross-hatch motion, covering a manageable section of the vehicle surfaces.
4. Wait for approximately 1 to 2 minutes or until you see a slight rainbow effect.
5. Wipe newly coated area with a coating removal towel, then buff with a clean plush microfiber towel. Turning towels over or using new as needed.
6. Continue to work in a small area, apply a few more drops and repeat the process for the entire vehicle, ensuring thorough coverage.
7. Keep dry for 24 hours and wait seven days for the first wash.
8. Full cure in 7 days.

Precautions:
Respirator gloves, and eye protection, protective clothing are recommended.
NO SMOKING within 50 feet while applying.
Keep away from excessive heat and freezing.
Keep container sealed when not in use.
Use preventative steps to guard against static discharge.

IF THERE IS A FIRE: Extinguish it by using either a fire, extinguishing powder, alcohol-resistant foam, or carbon dioxide.

Properly dispose of the container.
Store it in an area that is well ventilated and cool.

KEEP OUT OF REACH OF CHILDREN
EMERGENCY-CALL INFOTRAC
1-800-535-5053